• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Place of Origin: Guangdong, China (Mainland)
  • Brand Name: Tianji
  • Model Number: tj-poc
  • Type: magnetic powder brake
  • Use: For Man Roland Printer
  • Printing Type: Offset Printing Machine
  • Model: TJ-POC-5
  • N.M: 12,25,50,100,200,400
  • Voltage: DC24V
  • Current:(A): 0.94,1.24,2.15,2.4,2.7,3.5
  • Power:(W): 22.5,30,51.5,57.6,64.8,84
  • Number of Hours: 0.1,0.12,0.13,0.25,0.37,0.4
  • Weight(Kg): 5.2,9,14.5,37,53,100
  • Maximum Speed(r/min): 1800
  • Weight of powder(g): 20,33,60,140,225,370
  • item: magnetic powder clutch

Packaging & Delivery

Packaging Details Standard carton/wooden case or as customer's requirement
Delivery Time within 3-7 days upon receiving the payment

Chinese high precision magnetic powder clutch

Taiwan Brand-Tianji

Reliable Quality,Reasonable Price and Good Service.

Any email will be replied with 24 hours. Thanks for your time!

 

Product Description

 

Belief introduction

  A magnetic powder clutch is a special type of electromagnetic clutch which does not use friction plates. Instead, it uses a fine powder of magnetically susceptible material (typically stainless steel) to mechanically link an otherwise free wheeling disc attached to one shaft, to a rotor attached to the other shaft.

  When a magnetic fieldis applied to the powder, it forms chains connecting the disc and rotor. The strength of the chains depends on the strength of the magnetic field. We use the finest materials available for magnetic components to yield high friction indexes, as well as premium non-asbestos linings to improve response time and extend working life. We will be reliable brake supplier for you.

 

Maintenance knowledge

Magnetic clutch DC power supply for excitation. Magnetic powder clutch during transport, often using the magnetic particle build-up somewhere, andsometimes even a "stuck" phenomenon. As long as the clutch the whole time turning 180 degrees, beating with wooden hammer several times, so that loose powder off. Or turn the lever around the shaft, so long as immediately after turning. Connection with the coupling section of the clearance fit on the proposed use.

  Non-axial beat. Should be carried out before use running-turn, first through 20% of the rated current operation and then power off after a few seconds, repeated several times. In the running-in, the magnetic powder from the top of the filler, the situation in the barrier below the excitation current gradually turning into the side. If it is a long time for not using the magnetic clutch, it should be stored in a dry and clean place.

We can also can supply powder brake with mounting brackets as left figure.

 

* Volatge: dc 24v

 

Magnetic powder clutch/brake0.6KG-40KG stock supply

 

Imported highly magnetized magnetic powder

 

Imported wool felt and NSK bearings operate smoothly

 

Coil 100% use enamelled copper wire

 

Cast steel material

 

 

MODEL: TJ-POC Parameters:

ModelRated Torque (Nm)Capacity DC24 (75°C)Diameter of axle (mm)Max Speed (r/min)PowderWeight (g)
CurrentPowerTime
(A)(W)(s)
TJ-POC-0.660.8119.40.0812180010
TJ-POC-1.5120.9422.50.115180020
TJ-POC-2.5251.24300.1220180033
TJ-POC-5502.1551.50.1325180060
TJ-POC-101002.457.60.25301800140
TJ-POC-202002.764.80.37351800225
TJ-POC-404003.5840.4451800370

 

 Powder Clutch Details

 

Featured advantages

1. Fast response. Dry design means instant reaction to commands.

 

2. Durability. Excellent heat dissipation and quality materials mean long life, even under high frequency and high performance conditions.

 

3. Easy to install and maintain. Sealed bearing race eliminates the need for removal of the center core. No dust brush is needed, and operation is simper and easier.

 

4. No adjustment of the motor. The motor is designed so that it does not need adjustment of the friction surface, and once it is installed only very minor adjustments are needed.

 

5. Sure motion. One-piece plate will not slip even under the strongest vibration for longer life.

 

6. Adjustable torque. Torque levels can be increased or decreased by changing the current, making it suitable for a variety of applications.

 

 

 

You may like

Outer rotational shell POC-A Micro magnetic particle clutch POC-C Inner shell roates POC-B Tension controller and detector

 

Packaging & Shipping

 

 

Company Information

 

Factory

 

FAQ

 

More concerned for our products , please do not hesitate to inquiry now!

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview

Transactions

Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
Trade Assurance
China (Mainland) | Manufacturer, Trading Company
Transaction Level:
Supplier Assessments:
4 Transactions 20,000+
The supplier’s transactions conduted via Alibaba.com in the past 6 months.
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $44,000
Learn More